Drills

Power: 680W
Idle speed: 0-2800min
Number of strokes at idle speed: 0-44800min
Max.diam. in concrete: 16 mm
Max.diam. in steel: 13 mm
Max.diam. in wood: 30 mm
Chuck Range: 1.5-13mm
Weight: 2.0 kg

Power 680 W
Revolutions 2800 rpm
Stroke frequency 44800 1/min
Noise level 92 dB(A)
Max. drilling diameter in wood 30 mm
Max. drilling diameter in metal 13 mm
Max. drilling diameter in concrete 16 mm
Chuck grip range 1.5-13 mm
Width 72 mm
Length 303 mm
Height 222 mm
Weight 1.7 kg.

Power: 230 W
Idle speed: 4500 min
Chuck hole width: 6.5 mm
Drilling diameter in steel: 6.5 mm
Drilling diameter in wood: 9 mm
Weight: 0.9 kg

Power: 510 W
Idle speed: 0-500 min-1
Chuck: 1.5-13 mm.
Maximum ø - steel: 13 mm.
Maximum ø - wood: 36 mm.
Noise: sound pressure 86 dB(A)
Noise: sound power 97 dB(A)
Noise: Deviation 3 dB(A)
Vibrations: drilling into metal 2.5 m/s²
Vibration: deflection (K) 1.5 m/s²
Weight: 2.2 kg.

Power - 650 W
Rev. eg stroke / low - 650 - 1.250 min-1
Rev. eg stroke / high - 700 - 1,500 min-1
Chuck - 1.5 - 13 mm
Max. ø - steel - 13 mm
Max. ø - wood - 30 mm
Mechanical speeds - 2
Noise: sound pressure - 84 dB(A)
Noise: sound power - 95 dB(A)
Noise: Deviation - 3 dB(A)
Vibrations: metal drilling - 2.5 m/s²
Vibrations: deflection (K) - 1.5 m/s²
Dimensions (L x W x H) - 370 x 82 x 140 mm
Weight: - 2.9 kg

Required power: 450 W
Idle speed: 0-3000
Chuck range: 1.0-6.5mm
Max. drilling diameter:
-In wood 25 mm
-In steel 10 mm
Weight: 1.3 kg

Steel 1/2” (13 mm)
Wood 1-3/8” (36 mm)
No Load Speed 650 RPM
AMPS (120V) 6.3 A
Vibration Level 2.5 m/s2
Noise Level 86 dB(A)
Overall Length 13-3/8” (340 mm)
Net Weight 2.9 kg

Power: 230.00 W
Maximum in metal: 6.50 mm
Chuck range: 0-6.5mm
Supply voltage: 230 V
Brand: Makita
No-load speed*: 4500 rpm
Model: 6501
Weight: 0.90 kg

Power: 680 W
Idle speed: 2,800 min-1
Beats per minute: 44.800 min-1
Chuck: 1.5 - 13 mm
Maxim. ø - steel: 13 mm
Maxim. ø - wood: 30 mm
Maxim. ø - concrete: 16 mm
Sound pressure noise: 92 dB(A)
Sound power noise: 103 dB(A)
Deviation noise: 3 dB(A)
Impact drilling vibrations in concrete: 19.0 m/s²
Drilling vibrations in metal: 2.5 m/s²
Deflection Vibration (K): 2.0 m/s²
Dimensions (L x W x H): 303 x 72 x 222 mm
Mass: 2 kg

Power 710 W
Idle speed (max.) 2900 min
Drilling diameter in steel (max.) 13 mm
Drilling diameter in concrete (max.) 20 mm
Drilling diameter in wood (max.) 40 mm
Idle speed (1st gear) 850 min
Idle speed (2nd gear) 2900 min
Number of gears 2
Weight: 2.3 kg

Power: 450.00 W
Maximum in metal: 10.00 mm
Chuck range: 1.5-10 mm
Weight: 1.30 kg
Soft start: yes
Hit: no
Built-in work light: no
Supply voltage: 230 V
Reverse: yes
Speed control: yes
Number of speeds (degrees): 1
No-load speed*: 0-3000 rpm

Power: 710 W
Voltage: 230V 50Hz
Idle speed: 0 - 3200 min-1
Chuck: 1.5 - 13mm
Max. hole in wood, mm - 18
Max. hole in steel, mm - 13
Max. hole in concrete, mm - 13
Weight 1.7 kg

Technical parameters:

Power: 1350 W
Nominal voltage: 220 V, 50 Hz
Chuck diameter: 13 mm
Idle speed: 0-2800 rpm
Drilling capacity in steel: 13 mm
Drilling capacity in wood: 30 mm
Drilling capacity in concrete: 15 mm
Weight: 2.1 kg

Technical parameters:

Voltage/frequency: 220 V/50 Hz
Power: 450 W
Idle speed: 0-1150 rpm
Chuck diameter: 10 mm
Drilling diameter in wood: 18 mm
Drilling diameter in metal: 10 mm
Chuck type: self-tightening
Weight: 1.6 kg

Technical parameters:

Power: 1100 W
Nominal voltage: 220 V, 50 Hz
Chuck diameter: 13 mm
Idle speed: 0-3000 rpm
Drilling capacity in steel: 13 mm
Drilling capacity in wood: 30 mm
Drilling capacity in concrete: 15 mm
Weight: 1.9 kg

Technical parameters:

Voltage: 220 V
Frequency: 50 Hz
Power: 800 W
Chuck Type: Keyless
Maximum chuck clamping diameter: 13 mm
Idle revolutions (rpm): 0-3000
Drilling capacity in wood: 30 mm
Drilling capacity in steel: 13 mm
Drilling capacity in concrete: 15 mm

Technical parameters:

Voltage: 220 V / 50 Hz
Power: 650 W
Chuck: 5 - 20 mm
Revolutions: 180 - 2770 rpm.
Number of gears: 16
Support dimensions: 420 x 250 mm
Table size: Ø 290 mm
Weight: 43 kg

Nominal power consumption: 600 W
Idle speed: 0 – 2,800 min-1
Output power: 301 W
Weight: 1.8 kg
Torque (mild case of cornering): 10.8 Nm
Rated torque: 1.8 Nm
Drill Spindle Attachment Thread: 1/2" – 20 UNF
Clamping range: 1.5 – 13 mm
Length: 266.0 mm
Height: 180.0 mm
Impact frequency at idle speed: 0 – 44,800 min-1
Ø of the hole in concrete: 13 mm
Ø of the hole in wood: 25 mm
Ø of the hole in steel: 10 mm
Ø of the hole in masonry: 15 mm
Stepless speed regulation
Right/Left rotation
Electronic
Handle with soft anti-slip coating

Nominal power consumption: 550 W
Idle speed: 0 - 2,800 rpm.
Nominal torque: 1.5 Nm
Drill spindle attachment thread: 43
Chuck range: 1.5 – 13 mm
Dimensions (w/d/h): 66 / 262 / 253 mm
Impact frequency at idle speed 0 - 41,800 rpm.
Ø of the hole in concrete: 13 mm
Ø of the hole in wood: 25 mm
Ø of the opening in steel: 10 mm
Ø of the hole in masonry: 13 mm
Weight: 1.8 kg

ominal power consumption: 600 W
Idle speed: 0 - 3000 rpm.
Nominal torque: 1.5 Nm
Drill spindle attachment thread: 43
Chuck range: 1.5 – 13 mm
Dimensions (w/d/h): 67 / 201 / 290 mm
Impact frequency at idle speed 0 - 41,800 rpm.
Diameter of hole in concrete: 13 mm
Diameter of hole in wood: 25 mm
Diameter hole in steel: 10 mm
Diameter of hole in masonry: 13 mm
Weight: 1.7 kg

Nominal power consumption: 800 W
Idle speed: 0 – 1,100 / 3,000 rpm
Output power: 420 W
Nominal revolutions: 0 – 740 / 1,930 rpm
Torque (slight cornering case): 24.0 / 14.0 Nm
Nominal torque: 4.8 / 1.8 Nm
Drill Spindle Attachment Thread: 1/2" – 20 UNF
Clamping range: 1.5 – 13 mm
Length: 347 mm
Width: 217 mm
Frequency of shocks at idle speed: 0 - 17,600 / 48,000 rpm
Torque, max.: 24.0 / 14.0 Nm
Drilling range:
Diameter of the hole in concrete: 16 / 12 mm
Diameter of the hole in wood: 35 / 22 mm
Diameter of hole in steel: 13 / 6 mm
Diameter of hole in stone: 18 / 14 mm
Diameter of the hole in masonry: 18 / 14 mm
Weight: 2.6 kg

Power: 650 W
Torque: 8.6 Nm
Chuck range: 1.5-13mm
Idle Speed: 0-2800rpm
Beat rate: 0-47600 beats/min
Weight: 2.045 kg