Paints, varnishes, plasters and accessories

Application temperature: From +5°C to +30°C.
Consumption rate: 90-130 ml/m2
Packaging: 750 ml

Consumption rate: About 1.5-1.7 kg/m2/mm.
Packaging: 25 kg

Consumption rate: Approximately 20-30 ml/m2 depending on absorption and purpose.
Shelf life and storage: 12 months in original packaging. To be stored at a temperature of +5°C to +25°C,
protected from sunlight and frost.
Packaging: 1L.

Optimum weather conditions: Base and air temperature between + 5°C and + 30°C.
Possibility of placing a mesh: after a minimum of 48 hours.
Possibility of applying finishing layers: after a minimum of 7 days.
Approximate consumption rate: About 5-6.5 kg. for gluing and about 5-6 kg. for leveling depending on the quality of the base,
the type of thermal insulation material used, etc.

Packaging: 25 kg

Optimal weather conditions: Substrate and air temperatures from +5°C to +30°C. Possible to embed reinforcement mesh: after min. 48 hours. Possible to apply finishing coats: after min. 7 days.

Approximate consumption of materials: About 5-6.5 kg/m² for bonding and about 5-7 kg/m² for leveling, depending on the quality of the substrate, the type of thermal insulation material used, etc.

Shelf life and storage: 12 months in original packaging in dry room on pallets.
Package: 25 kg.

Working time: About 20 min. (depending on the substrate).
Possibility of grouting after about 24 hours of drying under normal conditions (T 23° C, r.h. 50-60 %)
Cut: 25 kg

Application temperature: Substrate and air temperature + 5 ° C to + 25 ° C.

Open operating time: Approximately 30 minutes (depending on the substrate and atmospheric conditions). Possibility of grouting after approx. 24h under drying at optimum conditions (23 ° C and 50-60% r.h.).

Shelf life and storage: 12 months in original packing. Store at + 5 ° C to + 25 ° C, protected from sunlight and freezing.

Consumption: About 3-5 kg ​​/ m2, depending on the substrate and the thickness of the application.

Packaging:25 kg

Waterproof, acrylic paint for interior decoration. Suitable bases are any surface and,
leveled with BK-GletEx Universal - Universal white putty or BK-GletEx Acryl - Superfine ready putty for smooth surfaces.

Cost rate
Approximate consumption: 1.5-2 kg/m2

Drying time:
Apply the second layer after the first layer is completely dry. In normal
conditions (T = + 23-25 ​​° C, relative humidity = 50-60%), it takes about 6 hours.

Discharge:
If there is a need to adjust the consistency of the mixture being worked with,
up to 1% water can be added.

Spending rate:
Approximate consumption: 1.5-2 kg/m2

Drying time:
Apply the second layer after the first layer is completely dry. In normal
conditions (T = + 23-25 ​​° C, relative humidity = 50-60%) This takes about 6 hours.

Discharge:
If there is a need to adjust the consistency of the mixture being worked with,
up to 1% water can be added.

Cost rate
0.5-0.6 kg/m2 depending on the condition of the surface.

Approximately 65-75 ml/m2 for two coats.

approximately 120-130 ml/m2 for two coats.

Application temperature:
From +5°C to +30°C. Do not work in direct sunlight, rain or strong wind.

Cost:
Approximately 0.2-0.25 kg/m2 depending on the absorbency and roughness of
the foundation.

Application temperature:
From +5°C to +30°C do not work in direct sunlight, rain or strong wind.
High humidity and low temperatures can significantly increase bonding time
on the plaster.

Spending rate:
~ 5 kg/m2.

Installation:
The product is installed in accordance with the installation instructions of the outlet
thermal insulation facade system (ETICS), as well as the general rules for the implementation of
thermal insulation works in construction.

Spending rate:
1.1 m²/net m²

The product is installed in accordance with the instructions for installation of the contact thermal insulation façade system (ETICS), as well as the general rules for the execution of thermal insulation works in construction.

Application temperature:
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.

Consumption:
Approx. 2. 3-3. 2 kg/m² depending on the structure and grain size.

Shelf life and storage:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Application temperature:
From +5°C to +25°C. Do not work under direct sunlight, rain or strong wind.

Consumption:
50-80 ml/m², depending on absorbency and roughness of the surface.

Shelf life and storage:
12 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Application temperature:
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind.

Consumption:
Approx. 150-300 ml/m² depending on the absorbency and roughness of the substrate.

Shelf life and storage:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Spending rate:
Approximately 120-130 ml/m² for two coats.

Shelf life and storage:
18 months in original packaging. Store at a temperature of +5C to +25C, protected from sunlight and frost.

Apply the BK-Tape waterproofing tape to the first layer of fresh waterproofing coating and press it firmly into the corners with a putty knife. If there is residual air under the tape, squeeze it out. After the first coat has hardened, apply the second coat over the entire surface including the ends of the BK-Tape waterproofing tape.

Shelf life and storage:
Up to 12 months in original packaging. Store at temperatures between +5°C and +25°C, protected from sunlight and frost.

Spending rate:
about 0.050-0.100 l/kg interior dispersion paint.

Application temperature:
From +5 to +25°C. Do not work under direct sunlight, rain or strong wind.

Shelf life and storage:
36 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Consumption
100-125 ml/m² for single coat application.

Shelf life and storage:
Up to 18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Consumption:
Approximately 130-150 ml/m2 depending on absorption and roughness of the surface.

Application temperature:
The air and substrate temperatures during installation should be in the range from +5 ºC to +30 ºC. Do not work under direct sunlight, fog, wind or rain.

Consumption:
Approximately 2. 5-2. 7 kg/m² depending on technique and thickness of application.

Shelf life and storage:
18 months in original sealed packing. Store at +5°C to +25°C, in a dry and well-ventilated room. The date of manufacture is imprinted on the packaging.

Application temperature:
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.

Consumption:
Approx. 2. 3-3. 2 kg/m² depending on the structure and grain size.

Shelf life and storage:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Application temperature:
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.

Consumption:
Approx. 2. 3-3. 3 kg/m² depending on the structure and grain size.

Shelf life and storage:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Optimal operating temperature:
From +5°C to +30°C. The coating is completely dry after 24 hours. See product datasheet for more detailed instructions.

Consumption:
Approximately 0,05-0,10 l/m2, depending on the application technique.

Shelf life:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

Consumption:
About 100-105 ml/m² in one layer.

Duration and storage:
36 months in original packaging. Store at a temperature of +5°C to +25°C, protected from sunlight and freezing. Date of manufacture stamped on the packaging.

Application temperature:
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind. High humidity and low temperatures can significantly extend the render bonding time.

Consumption:
Approx. 5 kg/m².

Shelf life and storage:
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.